Apexstone 100N/22.5lb Gas Struts 15 inch Gas Strut Lift Support Gas Shocks Gas Spring Strut Gas Prop Struts 15 Inch, Set of 2

Do you have to hold the doors open with your head or have to have my husband/wife hold the door open while you get stuff out ? Are you looking for the suitable gas strut for your RV overhead cabinet doors ? Here's it, because once you open the doors with these struts on, they stay open until you physically close them.

Do you want to get struts to help open/close hoods and it stays in place until you pull it down ? Are you looking for the suitable gas strut for your Automotive Hoods ? Look at this, It is so nice for you to be able to use both hands without balancing the hoods at the same time.

Do you find something are good for any job needed to open and hold open a lid ? Look at this one, It do keep the cabinet open enough to display your goods without using your hands, and it could avoid banging your head when you close it.

1. Determine the Upper Mounting Point, it should be 4-5 inch, 5.5 inch maximum towards the hinge on the lid (do this bracket last so you can line up the closer with the side of the cabinet), as distance to the side of the lid, it depends on the thickness of your box, then mark A, drill 2 holes on the sides of the center point A.
2. Determine the Lower Mounting Point, open the lid to the angle where you want it open, keep in mind that the strut does not need to be perfectly vertical when determine the lower mounting point, as distance to the side of the lid, normally it's 10 mm/2/5 inch, then mark B, drill 2 holes on the sides of the center point B.
3. Fix the connectors and connect the joints and the strut.
1. If you feel powerful, move the upper mounting point 0.79 inch towards the hinge on the lid (0.79 inch once).
2. If you feel weak, move the upper mounting point 0.79 inch towards the opposite of the hinge on the lid (0.79 inch once).
3. When you adjust the upper mounting point, you should adjust the lower mounting point at the same time.