BATONECO 12" Electric Radiator Cooling Fan Mounting Kit, 12V Cooling Radiator Fan with 80W 800 CFM Slim High Performance Universal (Black)

12" Radiator Fan. This fan assembly is designed for both PUSHER and PULLER applications. To change airflow direction from the factory setting, you MUST follow the directions below or performance will be compromised!

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.

Take the four mounting feet provided and attach them to the slots on the outside of the fan housing at the desired locations around the perimeter.

Please Note: Tensioner springs included, (（not pictured) is optional. For use with mounting rods prior to placing through mounting feet. Tensioner Springs not necessary for mounting fan(s) to radiator.

Position the Fan Assembly against the radiator or air conditioning condenser. Take the four Mounting Rods and carefully install them through the Mounting Feet and then though EITHER the radiator or air conditioning condenser.

Take the four 1 x1 Foam Pads and remove the paper backing. Now installation them (sticky side toward the core) onto the Mounting Rods now protruding through the radiator or air conditioning condenser.

Take the four Mounting Clips supplied and install them onto the Mounting Rods. The mounting Clips can only be used one time, so make sure the Fan Assembly is in the correct location. Secure Mounting Clips until 1x1 Foam Pads are slightly compressed. Cut off any excess Mounting Rod.

The Electric Fan Assembly can be activated using a Manual Switch or Relay Wiring Kit. For Relay Wiring Kit, Reference the product label on the Electric Fan to determine the Positive (+) and Negative (-) wire colors.

Important: For Puller applications use the referenced wire colors stated. For Pusher applications the two wires MUST be reversed to change airflow direction.