Lypumso 3D White Carbon Fiber Vinyl Wrap, Car Wrap Film Roll with Air-Release Technology for DIY Use, Car Auto Decal Exterior and Interior Wrapping Film, Vehicle Self Adhesive Sticker (1FT x 10FT)

High quality: Experience our Lypumso Auto vinyl Wrap for a hyper-realistic carbon fiber look. This car wrap is specially designed for DIY users, and it provides a lightweight, economical alternative to paint. You can use this automotive-grade premium, high-quality vinyl for wrapping vehicles exteriors and interiors or for many other things that you want to look better. Will not harm painted surfaces: Lypumso Auto vinyl wrap will change up your car's look without the hassle that comes with a fresh new coat of paint. Our car wrap film won't eat through clear coats, paints, or finishes for the life of the vinyl. Decals can be removed later and have no impact on the existing paint; the paint underneath will look as bright as the day it was wrapped. 3D realistic carbon fiber: Lypumso Auto vinyl wraps are different from those cheap carbon patterns printed; there is a 3D twill-weave wrapping that resembles the genuine look of dry carbon fiber, and the weave could reflect light in the same way that actual carbon fiber would. This carbon fiber style sheet will transform anything you want into a carbon fiber look without spending so much. Easy to use: First, make sure that your car is clean. Remove any dust particles and dirt. Then, cut your section to size with an additional inch of margin and remove the backing paper. Make sure that it is held at tension to ensure there are no bubbles when you apply it. Next, gently lay the vinyl sheet over your chosen panel and softly press it into the center of the panel. Use a squeegee to ease the vinyl onto the surface from the inside out. Be patient and practice! Installation Tips: Keep the surface of the items clean and free of residue before installation. Cut to the desired size, peel off the backing paper, and then use a squeegee to smooth out the any air bubbles. During the installation process, we recommend using a heat gun to heat the wraps to improve their flexibility, but please do not pull them excessively. After successful installation, please keep away from sunlight and rainwater for several days to make the car stickers have better adhesion.